Kronetronics designs mechanical, electrical and public health systems for UK buildings. Our designs are coordinated, buildable and clear enough for the site team to install without guesswork.
Designed to current UK regulations and industry guidance
Building Regs Part LPart FPart OPart G & HBS 7671 (18th Ed.)BS EN 806BS 5839BS 5266CIBSE GuidesTM52 / TM59SBEM & SAPBREEAMISO 19650Building Safety Act
Why Kronetronics
Practical design from engineers who know what happens on site.
Plenty of consultancies produce drawings that look right in the office. Ours work when the ceiling grid goes up, the plant arrives and the commissioning engineer switches it on.
Buildable by design
Services sized and routed with installation, maintenance access and sequencing in mind. Real plant sizes, sensible access zones and routes that respect structure and other trades, so fewer RFIs reach your site team.
Director on every project
The director who wins your project is the one who delivers it. One-to-one contact from concept to handover.
1:1
Coordinated in 3D
Federated Revit models with clash detection against architectural and structural packages before anything is issued.
Compliance built in
Calculations you can audit, prepared against Part L, BS 7671, CIBSE guidance and the Building Safety Act.
All three disciplines
Mechanical, electrical and public health from one team, so the services fit together first time.
Involved at every stage, from brief to building in use.
Bring us in at feasibility or at technical design. Either way, our input stays consistent through all eight stages.
0
Strategic Definition
Services strategy, utilities and site constraints.
1
Preparation & Briefing
Performance brief, energy targets and surveys.
2
Concept Design
Plant strategy, space allowances and risers.
3
Spatial Coordination
Coordinated layouts and planning reports.
4
Technical Design
Detailed design, specifications and tender issue.
5
Manufacturing & Construction
Site support, technical queries and inspections.
6
Handover
Commissioning witness, O&M review and as-builts.
7
Use
Post-occupancy review and seasonal checks.
FAQ
Questions we're often asked.
Which RIBA stages do you cover?
All of them, from Stage 0 Strategic Definition through to Stage 7 Use. We can join at any point, including novation to a contractor at Stage 4 or 5.
Do you work directly for contractors?
Yes. Much of our work is for main contractors on design and build schemes and for M&E subcontractors who need detailed design or installation drawings.
Will a director be involved in my project?
Always. A director is your point of contact throughout, reviews the design and attends the key meetings.
Do you design in Revit or AutoCAD?
Both. Larger and BIM-led projects are modelled in Revit to ISO 19650. Refurbishments and smaller schemes are often better suited to AutoCAD 2D packages.
Where in the UK do you work?
We take on projects across the UK and arrange site visits to suit your programme.
Free Initial consultation
Have a scheme on the drawing board?
Send us the brief and a director will come back to you personally within one working day.
Mechanical, electrical and public health engineering under one roof, delivered in Revit and AutoCAD. One team, so the services fit together the first time.
Load calculations and dynamic modelling drive every decision, and plant selections are checked against real manufacturer data rather than rules of thumb.
Heating and cooling design
Air and ground source heat pumps
Ventilation and MVHR
Air conditioning and VRF
Overheating (TM52 / TM59)
Part L, SBEM and SAP input
Smoke ventilation
Controls and BMS
Electrical engineering
Power and light, safely distributed.
From the incoming supply to the last socket outlet, designed to BS 7671 with coordinated protection, sensible containment and lighting designed around how each space is used.
Supplies and DNO applications
LV distribution and sub-mains
Interior and exterior lighting
Emergency lighting (BS 5266)
Fire alarm (BS 5839)
Small power and containment
EV charging and solar PV
Access control, CCTV and data
Public health engineering
Water and drainage, sized right.
We treat public health as a core service, with hydraulic calculations, sensible riser strategies and early coordination with the architect on falls, stacks and access.
Hot and cold water services
Above-ground soil and waste
Rainwater and siphonic drainage
Booster sets and storage
Rainwater harvesting
Natural gas installations
Legionella mitigation (L8)
Sprinkler and wet riser interface
Revit & BIM
Revit models you can coordinate around.
All three disciplines modelled in Autodesk Revit to ISO 19650, with real families and correct system types so schedules, sections and quantities come straight from the model.
MEP modelling to agreed LOD
Navisworks clash detection
BIM Execution Plan support
Builder's work and penetrations
Plant room and riser models
COBie and asset data
AutoCAD
Clear 2D drawings, on any project size.
For refurbishments, fit-outs and smaller schemes we produce precise AutoCAD drawing packages that contractors can price and install from directly.
General arrangement layouts
System schematics
Plant room details
Riser diagrams
Existing services surveys
As-built and record drawings
Need one discipline, or all of them?
We take on full MEP commissions and single-discipline packages.
Kronetronics was set up by engineers who spent their careers in design offices and on construction sites. We know what a good drawing package saves a contractor, and what a poor one costs.
Director-led
Your project is never handed down the line.
What sets us apart is how closely our directors work on every scheme. You deal directly with a senior engineer who reviews every calculation, attends the key meetings and picks up the phone when your site team has a question.
That one-to-one relationship means faster decisions, consistent design intent from Stage 0 to handover, and accountability that stays with the people whose names are on the company.
The director who wins your project is the director who delivers it. That's the promise behind every Kronetronics design.
KThe Kronetronics directors
How we work
Built around the contractors who install our designs.
Main contractors
We work closely with main contractors on design and build projects, novated appointments and contractor's design portions, keeping the MEP design aligned with programme, budget and buildability.
Subcontractors
We support M&E subcontractors with detailed design, coordinated installation drawings and technical submissions, so installers have accurate information from day one.
Clients & architects
Plant space, riser sizes and ceiling voids decided early cost far less than ones fixed late. We get involved at the start so the building has room for its services.
Value engineering
Our value engineering proposals are tested against performance and compliance, so a cheaper option is still the right one once the building is in use.
Our values
People. Spaces. Performance.
People
One-to-one relationships with clients and contractors, and a director who knows your project personally.
Spaces
Services designed to fit the architecture, with sensible plant space, tidy risers and clean ceiling voids.
Performance
Systems that meet their energy and comfort targets in use, not just on paper at Building Control.
Speak to a director today.
No account managers in between. Just the engineer who will design your project.
